“Slabs
- Mesh Spacers / Chair Spacer : A four-legged
chair to support the wiremesh at its cross junction.
Place at centre to centre a distance of 600mm apart.
It specially designed to allow human traffic on the
mesh. It comes in all standard specified height. The
entire wiremesh will be perfectly and securely sits
and clips onto the chairs, it is tidy with no uneven
mesh and provide perfect concrete covers before and
after concreting.
“Walls
- Wall retaining Spacer : Looking like an 'arrow'
at both sides, it helps to ensure consistent thickness
throughout the whole panel of wall. It is specially
use to hold two layers of mesh or reinforcement bars
and at the same time provide perfect distance between
the two layers of mesh or reinforcement bars It is
the only four-in spacer which provide equal cover
at both ends, equal distances between meshs and also
equal thickness for the whole wall.
“Pre-cast
Yards, Lightweight panel -Custom made Spacer :
Custom Made Spacer possible in all different shapes
and design for different applications. A baby mesh
spacer. A Wheel. A baby Chair. A Ring or A Caterpillar.
Choose to meet one's specification or order to Custom
Made one's own design.
“Telecom
Manholes -Collar & Cap : A rough surface ONE
piece collar with 5 different length. Pre-designated
with marking to enable easy cutting to meet one's
requirement. Prevent confusion or mix-up. One for
all.
“Hollow-core
Slabs -Caps : A cap in either square, oval, oblong,
round, octagon, hexagon shapes. Capped it at both
ends of the pre-cast slabs. It prevent foreign materials
from blocking up the hole opening reverse for installation
of conceal service pipes or wires when in need also
prevent concrete from entering the hollow section
mean for reduce weight loading on building.
>>
Back to previous page
Where,
when and how to use a Spacer?